The goal is to unify all of the good information found in various bits and pieces into 1 large document. This document is for people who want to learn to the how and why of password cracking. There is a lot of information being presented and you should READ IT ALL BEFORE you attempted doing anything documented here. I do my best to provide step by step instructions along with the reasons for doing it this way. (SOURCE : Jason's 'Cracking Password Techniques')

-: Wireless didn't work out-of-the-box and the usual ndiswrapper had to be used to get it partially working, yes partially because sometimes it works and sometimes it doesn't.. It worked out-of-the-box for a PHILIPS USB adapter for one of my sisters but recently it stopped working completely with our own PHILIPS router, though I think this may be caused by the router

-: Screen resolution: man this was a pain to get it working as it should, after searching the web and Ubuntu forums I found a way to configure it (the terminal way) but it still didn't work 100%

-: Keyboard numlock: this never worked for me in Ubuntu (last one I tried was 8.04), the numlock light was always on but the numeric keys weren't working so I had to press the numlock button twice every time I started the computer and logged in Ubuntu

-: The UI oftenly stopped working for newly started applications so a system reboot was necessary every time it happened

-: My two sisters seemed to have a lot of problems with DVD playback while it worked nicely for me in the past if I remember correctly

If you run a windows computer you’ll know like many others than after a while your system will in doubt start running slow. Most people will restart their computer to remove and idle processes. But if there’s a simpler way, why restart every time windows decides it doesn’t like you today? 

With increasing anti-virus security in place against email-aware viruses and malware, hackers are turning their attention to less well-defended routes such as USB drives. This is the latest method that’s used by hackers to torment innocent users. However, there are ways you can protect your computer from USB and Pen drive viruses.

A Problem with CD and DVD disc is it don’t last forever and also it’s sensitive. If the disc has your finger print or small scratches because of bad handling, chances are old disc players can’t read the disc properly. As for most modern disc players, it has error correction and can usually read through fingerprints as scratched surface. However, if your disc player is unable to read your disc and you need to get back your data or photo from there, here are a few tools that you can use to try to get back your data before taking chances in some weird methods such as using toothpaste, banana skin, candle wax or even flushing it in toilet bowl!

Hi friends,here i give you give the C++ virus code.  Actually Batch code is converted to C++ virus code.  If you like you can use it as batch code also.

Warning: DO NOT use this to damage Cisco systems, or gain unauthorized access to systems. This tutorial is just something to use for educational purposes. Only use this information in a legal way (the hacker wargames for instance), and do not damage or destroy anything. This is a step-by-step guide on how a series of proven cisco exploits can be used to gain access. If you get caught breaking into a cisco router, or screw the system up, you can interrupt hundreds of internet clients, and cost thousands of dollars, so only use this when you are allowed!! Using this the wrong way will get you into a lot of trouble.

Section 1: Why hack a cisco router?

You probably are wondering.. why hack into a cisco router?

The reason being is that they are useful when it comes to breaking into other systems...

Cisco routers are very fast, some with 18 T1 connections on one system, and they are very flexible and can be usedin DoS attacks or to hack other systems since most of them run telnet.

They also have thousands of packets going through them at any one time, which can be captured and decoded... A lot of cisco routers are also trusted systems, and will let you have a certain amount of access to other computers on it's network.

----------------------------------

Section 2: finding a cisco router

Finding a cisco router is a fairly easy task, almost every ISP will route through at least one cisco router. The
easiest way to find a cisco router is to run a traceroute from dos (type "tracert" and then the IP address of
anyone's computer), you can trace pretty much anyone because the trace will show all of the computer systems between your computer and their computer. One of these systems will probably have the name "cisco" in it's name. If you find one like this, copy down it's IP address.

Now you have the location of a cisco router, but it may have a firewall protecting it, so you should see if it's
being blocked by pinging it a couple times, if you get the ping returned to you, it might not be blocked. Another way is to try to access some of the cisco router's ports, you can do this simply by using telnet, and opening a connection to the router on port 23.. If it asks for a password, but no username, you are at the router, but if it wants a username aswell, you are probably at a firewall.

Try to find a router without a firewall, since this tutorial is on the routers and not how to get past the
firewalls. Once you're sure you have found a good system, you should find a proxy server which will allow you to use port 23, this way your IP will not be logged by the router.

---------------------------------

Section 3: how to break into a cisco router

Cisco routers running v4.1 software (which currently is most of them) will be easily disabled. You simply connect to the router on port 23 through your proxy server, and enter a HUGE password string, something like;

10293847465qpwoeirutyalskdjfhgzmxncbv019dsk1029384 7465qpwoeirutyalskdjfhgzmxncbv019dsk10293847465qpw oeirutyalskdjfhgzmxncbv019dsk10293847465qpwoeiruty alskdjfhgzmxncbv019dsk10293847465qpwoeirutyalskdjf hgzmxncbv019dsk10293847465qpwoeirutyalskdjfhgzmxnc bv019dsk10293847465qpwoeirutyalskdjfhgzmxncbv019ds k10293847465qpwoeirutyalskdjfhgzmxncbv019dsk

Now wait, the cisco system might reboot, in which case you can't hack it because it is offline.. But it will
probably freeze up for a period of 2-10 minutes, which you must use to get in.

If neither happens, then it is not running the vulnerable software, in which case you can try several DoS attacks,like a huge ping. Go to dos and type "ping -l 56550 cisco.router.ip -t", this will do the same trick for you.

While it is frozen, open up another connection to it from some other proxy, and put the password as "admin", the reason for this is because by default, this is the router's password, and while it is temporarily disabled, it will revert to it's default state.

Now that you have logged in, you must acquire the password file! The systems run different software, but most will have a prompt like "htl-textil" or something, now type "?" for a list of commands, you will see a huge list of commands, somewhere in there you will find a transfer command, use that to get the password file of admin (which is the current user) and send it to your own IP address on port 23. But before you do this, set up HyperTerminal to wait for a call from the cisco router. Now once you send the file, HyperTerminal will ask you if you want to accept the file that this machine is sending you, say yes and save it to disk. Logout.

You are now past the hardest part, give yourself a pat on the back and get ready to break that password!

------------------------------

Section 4: breaking the password

Now that you have acquired the password file, you have to break it so you can access the router again. To do this, you can run a program like John the Ripper or something on the password file, and you may break it.

This is the easiest way, and the way i would recommend. Another way would be to try and decrypt it. For this you will need some decryption software, a lot a patience, and some of the decryption sequences.

Here is a sequence for decrypting a cisco password, you have to compile this in linux:

If you do not have Linux, then the only way to break the password is to run a dictionary or brute-force attack on the file with John the Ripper or another password-cracker.

-------------------------------

Section 5: Using the router

To use this wonderful piece of technology, you will have to be able to connect to it, use a proxy if you do not want  your IP logged. Once you have logged in, you'll want to disable the history so no one can look at what you were  doing, type in "terminal history size 0". Now it won't remember anything! Type "?" for a list of all of the router's  commands, and you will be able to use most of them.

These routers usually have telnet, so you can use telnet to connect to other systems, (like unix boxes) and hack into them. It also is equipped with ping and traceroute, which you can use to trace systems or do DoS attacks. You  may also be able to use it to intercept packets, but i do not recommend this, as it will not always work, and may  get you noticed....

---------------------------------

If you don't hack a cisco your first time, don't worry... you probably won't do it the first time, or even the
second. It takes practice and patience. This is just to show you how... And make sure you are going after something that is LEGAL.

Thanks...

• It will increase your monthly Internet bill especially when you have to pay per byte of data transfer.
• It will decrease your Internet access speed since you are now sharing the same internet connection with other users.
• It can create a security hazard* as others may hack your computers and access your personal files through your own wireless network.

Wireless LANs (WLANs) bring incredible productivity and new efficiencies to organizations of all sizes. Advances in WLAN features and capabilities allow organizations to offer the benefits of wireless to their employees without sacrificing security. Properly deployed, WLANs can be as secure as wired networks. This paper discusses the five steps to creating a secure WLAN infrastructure.

• Create a WLAN security policy.

• Secure the WLAN:

– Modify the default SSID.
– Use strong encryption.
– Deploy mutual authentication between the client and the network.
– Use VPNs or WEP combined with MAC address control lists to secure business-specific devices.
– Use identity networking in combination with VLANs to restrict access to network resources.
– Ensure management ports are secured.
– Deploy lightweight access points as they do not store security information locally.

– Physically hide or secure access points to prevent tampering.
– Monitor the exterior building and site for suspicious activity.

• Secure the wired network against wireless threats:

– Deploy and enable wireless IPSs to prevent rogue access points and other wireless threats—even if you do not have a WLAN.
– Permanently remove any rogue devices using location tracking.

• Defend against external threats:

– Equip mobile devices with similar security services as the company network (firewalls, VPNs, antivirus software, etc.).
– Ensure mobile device security policy compliance with Cisco NAC.

• Enlist employees in safeguarding the network through education.

SOURCE : Cisco System

Thanks....

Its not tough to Hijack / Capture / Sniff Wifi Traffic on almost any network as long as you are connected to it. Once you apply all the correct tricks, all future traffic for Wifi clients i.e. laptops, mobiles will be routed from your PC, giving you every bit of information about what others are doing on the network.

Hello guys,

I am going to show you in a short tutorial how to read out a password of a web browser.

In this tutorial i will give you the way/trick for hack the Wireless network WEP key...

[THIS POST IS POSTED BY 'CODE MOBILE' {codemobile@yahoo.com}]

PatchWorx v0.09

- Runtime

- Scantime

- USG

- EOF

- FUD 100%

Istealer can be used to hack email account password and find passwords of various emails. I have provided link for software download... just read on.

Hacking tools n SQL Injection tools

1. Open Time Stopper
2. Browse & select .exe of required trial software
3. Choosethe new date (Any date which occurs in between your trial software timeperiod before expiration, suggestion: set it to two days before trialsoftware expiration date.)
4. Choose any time
5. Click open software on your selected date

Download Timestopper

 Thanks...

1. First of all download Winspy keylogger software from link given below:

   http://www.win-spy.com/

2. After downloading this software, run the .exe. You will be asked to register yourself where you will be asked to enter a Userid and Password. Remember this password as it will be required in uninstalling the software.
3. Now, another box will come, explaining you the hot keys(Ctrl + Shift + F12) to start the Winspy keylogger software.
4. Now, on pressing hot keys, a login box will come asking userid and password. Enter them and click OK.
5. Now, Winspy’s main screen will be displayed as shown in image below:
6. Select Remote at top, then Remote install.
7. On doing this, you will get a popup box as shown in image. Now, fill in the following information in this box.

   User – type in the victim’s name
   File name – Name the file to be sent. Use the name such that victim will love to accept it.
   File icon – Keep it the same
   Picture – select the picture you want to apply to the keylogger.
   Email keylog to – Enter your Email address. Hotmail and Yahoo doesnot accept Keylog Files so enter other email address.
   Thats it. This much is enough. If you want, can change other settings also.

8. After you have completed changing settings, click on “Create Remote file”. Now just add your picture to a winrar archive. Now, what you have to do is only send this keylog file to your victim. When victim will open this file, all keystrokes typed by victim will be sent to your email inbox. Thus, you will get all his passwords and thus will be able to hack his email accounts and even Myspace account password.

• A comfortable familiarity with the distribution of Linux you wish to use.
• Basic understanding of how networks communicate.
• Reasonable understanding of how TCP works (ie. the three way handshake)
• Reasonable understanding of how UDP works
• A system to test this stuff on, if you don’t have a system to test this stuff out on, you could always set up a few virtual machines using VirtualBox or VMWare.
• A will to learn about this kind of stuff

#!/bin/sh
 
#Port and IP addresses changed to protect the innocent.
 
IPTABLES=/sbin/iptables
MODPROBE=/sbin/modprobe
 
### Flush existing rules and settings. Set to default drop.
echo "[+] Flushing existing iptables rules..."
$IPTABLES -F
$IPTABLES -X
#$IPTABLES -t nat -F
CLICK HERE TO DOWNLOAD FULL SCRIPT (1.82KB)